When we buy a cam lock, many people will ask a question like this. If the cam lock is difficult to open, should we add some oil to it?
In fact, the cam lock is different from the locks we use in our everyday life. The structure of the cam lock is relatively simple, but every time the key is inserted into the lock, it is difficult to turn the key. People then will put some oil in the keyhole of the door lock. In fact, the door is very difficult to open, but it can be solved as long as you put in a pencil. There is no need for oil. Because each lock cylinder is maintained with lubricating oil when leaving the factory, the keyhole does not need to be refueled. As a result, the cam lock is hard to unscrew like door locks.
In fact, the cam lock is different from the locks we use in our everyday life. The structure of the cam lock is relatively simple, but every time the key is inserted into the lock, it is difficult to turn the key. People then will put some oil in the keyhole of the door lock. In fact, the door is very difficult to open, but it can be solved as long as you put in a pencil. There is no need for oil. Because each lock cylinder is maintained with lubricating oil when leaving the factory, the keyhole does not need to be refueled. As a result, the cam lock is hard to unscrew like door locks.
What is the structure of the cam lock?
The cam lock we see in daily life is generally composed of bolts, lock bodies, nuts, screws and keys (as shown in the figure below).
The cam locking unit
The following pictures are introduced in sequence: first, the lock body. The cam lock is made of zinc alloy and an integral die-cast. The whole lock body adopts a precision casting solid lock body, which mainly plays the waterproof, rustproof and strong and durable role.
The thread details of the lock body change. The thread of cam locks deepens, and the installation texture is good.
The second is the ring. It is mainly to prevent the lock body from shaking and damaging the product itself and improve the service life of the tongue.
The third is a fixed roller ring. The delicate and thick fixed ring is used to prevent the loose of cam locks after installation and use.
The fourth is the 90-degree limit class.
The fifth is the lock piece. The lock piece is the best part of the whole cam, that is, many pieces of cam locks are easy to break. After the experiment and discussion with the team, we, Topper cam Lock Company have improved the lock piece, like thickening, smoothing, firming and anti-theft.
The sixth is the pressure screw. It is easy to use. Tight but not loose.
Finally, speaking of the key, the key used by the cam lock is double-toothed with an anti-theft function. It generally can be used to prevent the technical method from opening, and prevent the main key from opening.
